Hengfengshuai (HENGFENGSHUAI) provides 1MW/2MWh liquid‑cooled Battery Energy Storage System (BESS) together with supporting 400V‑11kV step‑up solutions tailored for South‑African commercial‑industrial parks, mines, PV power plants and microgrid projects. This container‑based integrated system incorporates energy‑storage batteries, bidirectional PCS converters, Battery Management System (BMS), Energy Management System (EMS), liquid‑cooled thermal management, fire‑protection equipment, step‑up transformers and medium‑voltage switchgears.
1. Energy‑Storage Market Demands in South Africa
Container‑type Energy‑Storage Solution Adapted to South African Eskom 11kV Distribution Network
South Africa suffers from ageing power infrastructure and severe load‑shedding issues. Battery Energy Storage System (BESS) has become core equipment for backup power, peak‑shaving & valley‑filling, PV‑storage integration and grid support.
Hengfengshuai launches a complete solution integrating 1MW/2MWh liquid‑cooled energy‑storage container and 400V‑11kV step‑up equipment. The scope covers battery storage container, bidirectional PCS converter, liquid‑cooling system, EMS/BMS, fire‑protection system and medium‑voltage step‑up transformer. Compliant with local South‑African grid codes, the solution is widely deployed in commercial‑industrial parks, mines, PV‑storage power stations and municipal microgrid projects.
2. Major Challenges for South‑African 1MW/2MWh Liquid‑Cooled Energy‑Storage Projects
* Frequent load‑shedding and poor grid stability. Recurring Eskom load‑shedding causes heavy losses for factories, mines and commercial premises. Equipment shall support fast switching between grid‑tied mode and off‑grid backup mode.
* Harsh outdoor site conditions. Operating sites feature high ambient temperature and heavy dust; some coastal areas face high‑humidity corrosion. Air‑cooled energy‑storage systems suffer large battery temperature differences under South‑African operating conditions, shortening overall service life.
* 11kV medium‑voltage grid‑connection requirements. 11kV is the dominant voltage level of Eskom distribution network in South Africa. Conventional 400V low‑voltage energy‑storage systems cannot connect directly to local grids, requiring reliable 400V‑11kV step‑up configuration and qualified grid‑connection performance.
* Stringent local grid and safety compliance requirements. Projects must comply with NRS 097‑2‑1 and NERSA BESF grid‑connection codes, featuring anti‑islanding, low‑voltage ride‑through and island backup functions, and meet CoC electrical acceptance criteria.
* Full‑life‑cycle performance and O&M pressure. South‑African energy‑storage projects expect long equipment service life. Container‑style units shall minimise on‑site construction work and reduce long‑term operation‑and‑maintenance costs.
3. Hengfengshuai 1MW/2MWh Liquid‑Cooled Energy‑Storage Solution for South Africa
Hengfengshuai Electric delivers a combined package of liquid‑cooled energy‑storage container plus 400V‑11kV step‑up auxiliary equipment. Configurable components include battery storage system, bidirectional PCS, BMS, EMS, liquid‑cooling unit, fire‑protection gear, step‑up transformer and 11kV medium‑voltage switchgear.
Optimised system integration and electrical design reduce interface‑coordination workload among disparate devices, laying a solid equipment foundation for commercial‑industrial energy storage, mine microgrids and new‑energy‑attached energy‑storage projects.
System Architecture & Workflow
1MW/2MWh BESS 400V‑11kV Step‑up System Workflow
Lithium‑iron‑phosphate battery clusters (inside 20ft liquid‑cooled container) ↓ Bidirectional PCS (400V AC output) ↓ 400V‑11kV step‑up transformer ↓ Medium‑voltage switchgear ↓ Eskom 11kV distribution network
Functions of key equipment:
* Energy‑storage battery system: stores electrical energy and performs charging / discharging per operational commands.
* Bidirectional PCS converter: realises bidirectional conversion between DC battery power and AC power.
* Liquid‑cooling system: manages battery operating temperature and controls temperature deviation among battery modules.
* BMS (Battery Management System): monitors battery operating parameters and implements battery‑protection functions.
* EMS (Energy Management System): coordinates system operation according to pre‑configured control strategies.
* Fire‑protection system: provides fire detection and fire‑suppression functions based on selected configurations.
* 400V/11kV step‑up transformer: steps up 400V AC voltage to 11kV.
* 11kV medium‑voltage switchgear: executes switching, protection and control functions.
Supported operating modes: peak‑shaving & valley‑filling, peak‑valley arbitrage, self‑consumption for PV‑storage systems, backup power against load‑shedding, off‑grid microgrid operation, grid voltage & frequency regulation support.
4. Recommended Products
1MW/2MWh Liquid‑Cooled Energy‑Storage Container
| Item |
Parameters |
| Rated Power |
1 MW |
| Energy‑Storage Capacity |
2 MWh |
| Cooling Method |
Liquid cooling for effective battery temperature‑difference control |
| Battery Type |
Lithium‑Iron‑Phosphate (LFP) |
| AC Output |
400V, 50 Hz |
| Core Functions |
Grid‑tied / off‑grid island backup, Voltage Ride‑Through (VRT), intelligent EMS energy management |
| Container Dimension |
Standard 20‑foot container; factory pre‑assembly & pre‑test for fast on‑site commissioning |
400V‑11kV Step‑up Transformer
* Transformation ratio: 400V / 11 kV
* Matches 1 MW energy‑storage system capacity
* Designed for harsh South‑African outdoor conditions with dust‑proof and anti‑corrosion treatment
11kV Medium‑Voltage Switchgear
* Compatible with Eskom 11 kV distribution network
* Complies with South‑African SANS standards for protection and control of energy‑storage grid‑connection
5. Technical Advantages of 1MW/2MWh Liquid‑Cooled Energy‑Storage System for South Africa
✅ Liquid‑cooled thermal management: stabilises battery temperature, adapts to high‑temperature, dusty South‑African outdoor environments and extends battery cycle life.
✅ Complete 400V‑11kV step‑up package: one‑stop supply including energy‑storage container, step‑up transformer and medium‑voltage switchgear, eliminating compatibility risks for EPC contractors and project developers.
✅ Modular expandable design: 1 MW/2 MWh per unit; multiple containers can be paralleled and stacked for capacity expansion for large‑scale PV‑storage power plants.
✅ Compliant with South‑African grid standards: supports anti‑islanding, automatic island backup for load‑shedding scenarios and low‑voltage ride‑through; meets NRS 097‑2‑1 and NERSA BESF grid‑connection specifications.
✅ Designed in accordance with IEC and local standards: complies with IEC 62619 and IEC 62933 international standards. Test documentation available to support local CoC acceptance and NERSA filing.
6. Application Scenarios
* Commercial‑industrial park energy storage (peak‑shaving & valley‑filling + emergency backup for load‑shedding)
* Hybrid mine microgrids (PV + energy storage to partially replace diesel generators)
* Utility‑scale wind‑PV supporting energy‑storage projects
* Backup power for critical loads in factories and large warehouses
* Energy storage for municipal public facilities
7. Project References
1MW/2MWh Commercial‑Industrial Energy‑Storage Project, Gauteng, South Africa
* Deployed equipment: 1 set of 1MW/2MWh liquid‑cooled energy‑storage container; 400V‑11kV step‑up transformer and 11kV medium‑voltage switchgear
* Project purpose: factory peak‑shaving & valley‑filling plus emergency backup for load‑shedding
PV‑Storage Demonstration Project, Northern Cape, South Africa
* Deployed equipment: multiple paralleled 1MW/2MWh energy‑storage containers with 400V‑11kV step‑up system
* Project purpose: time‑shifted consumption of PV power and Eskom distribution‑network support
8. Frequently Asked Questions (FAQ)
Q1: What are the main use‑cases for the 1MW/2MWh energy‑storage container in South Africa?
It is mainly applied for commercial‑industrial peak‑shaving & valley‑filling, load‑shedding backup power, PV‑storage integration, mine microgrids and Eskom distribution‑network support. It connects to local 11 kV grid via 400V‑11kV step‑up transformer.
Q2: Does this energy‑storage solution satisfy local South‑African grid‑connection requirements?
The system implements anti‑islanding, island backup and low‑voltage ride‑through functions and conforms to NRS 097‑2‑1 and NERSA BESF specifications. Full‑set test documents are available for local CoC electrical acceptance and NERSA registration.
Q3: Why is liquid‑cooled energy storage preferred over air‑cooled alternatives for South‑African projects?
South‑African sites feature high ambient temperature and heavy dust. Liquid‑cooled solutions deliver superior battery temperature uniformity, mitigate battery capacity degradation and extend overall system service life.
Q4: Which South‑African provinces suit this 1MW/2MWh 400V‑11kV energy‑storage solution?
Applicable to Gauteng, Western Cape, KwaZulu‑Natal, Northern Cape, Free State, North West and Eastern Cape provinces for commercial‑industrial, mining and PV‑storage projects.
Q5: Can multiple 1MW/2MWh energy‑storage containers run in parallel for larger MW‑scale projects?
Yes. This product adopts modular design. Multiple containers can be paralleled to build higher‑capacity energy‑storage power stations.
Contact Hengfengshuai Electric
If you are an EPC contractor, project developer or system integrator for South‑African energy‑storage projects, please share your site conditions and project requirements.
Hengfengshuai Electric — One‑stop Supplier for Energy‑Storage & Step‑up Substation Solutions
E‑mail: hfs@hengfengshuai.com
Contact Us
